Dispensing Equipment
Dymax manual and automated fluid dispense systems and spray valves are easily integrated into existing manufacturing processes for easy application of coatings, lubricants, or masking resins.
OEM & MRO Engine Components
Maskants for Aerospace OEM & MRO Engine Components
Aerospace engine components are being designed for longer engine service life, pushing the limits of existing technology. Dymax light-curable materials address the growing challenges and demands for new technologies for applications in OEM and MRO sectors of the aerospace and defense industry.
With Dymax SpeedMask® easily mask and protect engine components in one step. SpeedMask maskants replace traditional tape, wax, solvent-based lacquers, and fixtures by offering fast-curing and reliable protection against most surface treatment processing environments. Our maskants are applied in a single layer, designed to conform to complex shapes, cure within seconds, and remove clean leaving no residue behind on non-porous surfaces when properly cured. Dymax maskants offer superior protection when masking for plating, grit blasting, machining, acid stripping, and more.
SpeedMask maskants have no solvents added and cure in seconds, providing cost savings through reductions in labor, rework and scrap, and ease of application and superior protection with consistent reliability.
Features
- Cure with LED or UV/Visible light in seconds
- Conform to complex shapes
- Easy to apply and remove from non-porous surfaces
- Single layer coverage
- No solvents added
- Increase in production and floor space
- Replace time-consuming tape, wax and lacquer masking methods
Maskants for Aerospace OEM & MRO Engine Components
Maskants for Aerospace OEM & MRO Engine Components
At Dymax, we understand the many challenges brought upon the aerospace and defense industry. Our light-curable conformal coatings and maskants address many challenges throughout avionics, engine - OEM and MRO, and rotorcraft sectors.
Product Number
Product Description
Regional Availability
726-SC
UV-curable maskant with color change from blue to pink upon cure. This resin is resistant to plating, anodizing, air plasma spray, grit blasting, and shot peening. This product remains flexible at higher temperatures and can be removed by peeling after exposure to heat.
7602
LED-curable, peelable maskant formulated for surface protection during plating, anodizing, grit blasting, and acid stripping processes.
Product Number
Product Description
Regional Availability
707
This temporary maskant is hard, durable, and provides excellent internal cavity protection during laser drilling operations. This product cures upon exposure to UV/Visible light and has a secondary heat-cure to address shadow areas. The material is 100% organic, cures quickly, and is easily removed by incineration at a minimum 650°C.
718
Light-curable thermal sprayable maskant with excellent surface and cavity protection during APS and HVOF. This fast-curing thixotropic gel exhibits high adhesion and resists flame-spray processes. Maskant is easily removed by incineration.
724
Clear, low adhesion, easy-peel surface treatment maskant with good surface protection properties. When properly cured with UV/Visible light energy, the maskant leaves no residue on the surface of the substrates
729
UV light-curable masking resin provides excellent surface and cavity protection of turbine components during acid stripping, high-temperature plating processes, and other harsh chemical operations. This 100% organic resin cures quickly with proper UV energy exposure and is easily removed by incineration.
7701
Rapid UV-curable maskant with moderate adhesion for surface protection. This product remains flexible at higher temperature processes. This maskant cures upon exposure to UV/Visible light and is easily removed with a hot-water soak, leaving no residue on non-porous sufaces.
728-G
Highly visible green maskant with good surface protection during plating and aggressive grit blasting, shot-peening, and anodizing processes. 100% organic, this thixotropic gel cures upon exposure to UV/Visible light and easily removed by peeling after a hot water soak.
728-G-LV
High adhesion, acid-resistant, green maskant for plating and aggressive grit blasting processes. This product cures upon exposure to UV/Visible light and is easily removed after a hot water soak or ultrasonic bath.
730-BT
UV/Visible light-curable, 100% organic blue maskant provides excellent surface protection during chemical milling and harsh-environment processing. This material is impervious to most acid and alkali solutions. When used as a temporary protective coating, the product replaces environmentally hazardous and time-consuming solvent- or water-based maskants
731-REV-A
Bright yellow, fluorescing maskant with excellent surface protection during vibratory finishing, plating, shot-peening, anodizing, and aggressive grit blasting. This 100% organic thixotropic gel exhibits high adhesion, and cures quickly. The masking resin is trimmable after cure, is easily peeled off with a hot-water soak and leaves no residue on surfaces when properly cured.
733-G-REV-A
UV-curable, green thixotropic gel maskant is sprayable onto components and resilient to blasting media. This maskant is a 100% organic masking resin that cures quickly and is easily removed by incineration.
734-BT
UV/Visible light-curable blue maskant provides good surface protection during harsh chemical environment processes. This product is impervious to most acid and alkali solutions. The masking resin is trimmable after cure and can be peeled off.
740-BT
Low adhesion, flexible blue maskant with good surface protection against paint, low-pressure grit blasting, shot peening, and general handling applications. The product cures upon exposure to UV/Visible light and is easily removed by peeling, leaving a residue-free surface on non-porous surfaces.
7502
UV/Visible light curable protective resin cures on demand, saving under-the-hood-aluminum components in vehicles from corrosive fluids, moisture, and salt.
706
UV light-curable acid stripping and thermal spray maskant with excellent surface and cavity protection. High viscosity, 100% organic, sprayable thixotropic gel provides high adhesion and removes via incineration.
750-SC
High-temperature maskant with color change from purple to pink upon cure. This maskant provides excellent surface protection during higher temperature thermal spray coating, plasma spray, HVOF, and aggressive grit blasting processes. This 100% organic resin cures upon exposure to UV/Visible light and is easily removed by incineration.
Need help, use the product finder
Use our formulated product finder to help you find the right material. Interested in learning more or have questions? Contact Us, we want to hear from you.
